|
DUAL VOR/DUAL GS DIPLEXER (CI-1125)
|
DUAL VOR/DUAL GS DIPLEXER
Frequency · 108-118 MHz & 329-335 MHz
More Info...
|
|
|
|
1 VOR/1 G/S DIPLEXER (CI-507)
|
Single VOR/single glide slope diplexer allows the operation of one VOR and one glide slope receiver from one VOR/glide slope antenna.
Compact design makes installation easy. More Info...
|
|
|
|
2 VOR/1 GS TRIPLEXER (CI-505)
|
Dual VOR coupler/single glide slope diplexer allows the operation of two VOR receivers and one glide slope receiver from one VOR/glide slope antenna.
Compact design makes installation easy. More Info...
|
|
|
|
3 VOR SPLITTER (CI-1114)
|
Coupler provides for use of three VOR receivers from one VOR antenna.
Coupler circuitry is housed in stamped enclosure to ensure high reliability. More Info...
|
|
|
|
3 VOR/1 GS DIPLEXER (CI-1115)
|
|
Triple VOR coupler/single glide slope diplexer allows operation between three VOR receivers and one glide slope receiver from the same VOR/glide slope antenna. More Info...
|
|
|
|
AMPLIFIED ANTENNA SPLITTER (ALDCBS1X2)
|
|
AMPLIFIED ANTENNA SPLITTER More Info...
|
|
|
|
ANTENNA COUPLER (CI-5120)
|
|
Designed for use with Garmin GNS 580 and similar systems. More Info...
|
|
|
|
COUPLER VOR/108-118 MHZ/50 OHMS/BNC FEMALE CONNECTOR (CI-502)
|
Dual VOR coupler allows the simultaneous use of two VOR receivers from one VOR antenna.
Compact design makes installation easy. More Info...
|
|
|
|
DIPLEXER 1VOR ANT TO 1NAV/1GS (AV-570)
|
|
The AV-570 coupler splits the signal from a VOR-Type NAV antenna to feed NAV and Glide Slope receivers. The coupler's construction is similar to the AV-547 coupler and operates at altitudes up to 50,000 ft. More Info...
|
|
|
|
DIPLEXER 2 NAV FROM 1 ANT/BNC (AV-547)
|
|
The AV-547 coupler feeds two navigation receivers from one antenna. More Info...
|
|
|
|
DIPLEXER/DUAL GS (DM H24-1)
|
|
This Antenna Coupler is ruggedly built and housed in an aluminum case
with all circuit elements fully encapsulated. It is specifically
designed to couple multiple receiver systems to a single antenna with a
minimum of insertion loss. The DM H24-1 is a dual glide slope
which will permit operation of two glide slope receivers from one glide slope antenna. More Info...
|
|
|
|
DIPLEXER/DUAL VOR OR DUAL MKR (DM H21-1)
|
|
This Antenna Coupler is ruggedly built and housed in an aluminum case with all circuit elements fully encapsulated. More Info...
|
|
|
|
DIPLEXER/SINGLE VOR/SINGLE GS (DM H22-1)
|
|
This Antenna Coupler is ruggedly built and housed in an aluminum case
with all circuit elements fully encapsulated. It is specifically
designed to couple multiple receiver systems to a single antenna with a
minimum of insertion loss. The DM H22-1 is a single VOR and single GS which will permit operation of one NAV and one GS receiver from one VOR antenna. More Info...
|
|
|
|
DUAL COMM DIPLEXER (CI-601)
|
Dual communication/single antenna duplexer designed to provide operation between two transceivers and one antenna.
In the de-energized mode, the diplexer acts as a 3 dB coupler with the output ports isolated by 20 dB.
Control voltage actuated by the microphone circuit switches the antenna to transmitter No. 1 or transmitter No. 2. More Info...
|
|
|
|
DUAL GS SPLITTER (CI-503)
|
Dual glide slope coupler designed to allow the operation of two glide slope receivers from one glide slope antenna.
Compact design makes installation easy. More Info...
|
|
|
|
DUAL MARKER BEACON DIPLEXER (CI-509)
|
Dual marker beacon coupler permits the use of two marker beacon receivers from one marker beacon antenna.
Compact design makes installation easy. More Info...
|
|
|
|
DUAL OUTPUT POWER COMBINER (CI-120-5)
|
Two input - two output Power Combiner is standard equipment with
Comant's CI-120-200 G/S-L as supplied to Cessna.
A typical CI-120-200 G/S-L set up is depicted in the inset of this page.
The CI-120-5 provides for two separate cable runs to the avionics installation for NAV 1 and NAV 2 receivers. More Info...
|
|
|
|
DUAL POWER COMBINER VOR/GS (CI-120-4)
|
Two input - two output Power Combiner is standard equipment with Comant's CI-120-200 G/S and CI-135-200. A typical CI-120-200 G/S set up is depicted in the inset of this page.
For either antenna system, the CI-120-4 provides for two separate cable runs to the avionics installation for NAV 1 and NAV 2 receivers. More Info...
|
|
|
|
NAV GLIDE SLOPE DIPLEXER (CI-1120)
|
Provides operation between a single VOR receiver and a single glide slope receiver from the same VOR/glide slope antenna.
Offers polarized VOR and GS output connectors.
For military applications. More Info...
|
|
|
|
PASSIVE ANTENNA SPLITTER (LDCBS1X2)
|
|
PASSIVE ANTENNA SPLITTER More Info...
|
|
|
|
PASSIVE SPLITTER/1x4 (LDCBS1X4)
|
|
PASSIVE SPLITTER/1x4 More Info...
|
|
|
|
|
PHASING COUPLER FOR DMN4-17N (DM N4-17-2)
|
More Info...
|
|
|
|
|
PHASING COUPLER FOR DMN4-17P/R (DM N4-17-4)
|
The DM N4-17 VOR/LOC/Glide slope antenna is designed
for general aviation, commercial, and military aircraft that
operate up to Mach 1.0. The DM N4-17 is designed and
qualified to provide a low-cost, lightweight, low-drag
antenna for state-of-the-art avionics systems.
The antenna is not only T.S.O.’d, its performance
parameters exceed the environmental specifications
of MIL-E-5400 Class 3 equipment. Therefore, the
DM N4-17 can be installed on single engine to jet engine
aircraft.
The balanced loop design of the DM N4-17 assures an
omnidirectional radiation pattern at the horizon to obtain
the maximum signal for standard VOR and area
navigation, which in turn provides more receiving distance
and reliable system performance. More Info...
|
|
|
|
QUADRAPLEXER/DUAL VOR/DUAL GS (DM H69-1)
|
The DM H69-1 provides, in one small lightweight component, the ability to operate dual NAVS and dual Glide Slope receivers from one VOR antenna. As with our coupler series, the DM H69-1 is designed to couple multiple systems to the single antenna with minimum insertion loss but with more than adequate isolation to prevent intersystem crosstalk.
The ruggedly built DM H69-1 is housed in an aluminum case and all circuit components are fully encapsulated for vibration protection as well as waterproof protection. More Info...
|
|
|
|
REPACKAGED DM H23-1 /SN: 19941 (DMH231/001)
|
See DM H23-1 for product description.
More Info...
|
|
|
