Single VOR/single glide slope diplexer allows the operation of one VOR and one glide slope receiver from one VOR/glide slope antenna. Compact design makes installation easy. More Info...
Dual VOR coupler/single glide slope diplexer allows the operation of two VOR receivers and one glide slope receiver from one VOR/glide slope antenna. Compact design makes installation easy. More Info...
Coupler provides for use of three VOR receivers from one VOR antenna. Coupler circuitry is housed in stamped enclosure to ensure high reliability. More Info...
Triple VOR coupler/single glide slope diplexer allows operation between three VOR receivers and one glide slope receiver from the same VOR/glide slope antenna. More Info...
The AV-570 coupler splits the signal from a VOR-Type NAV antenna to feed NAV and Glide Slope receivers. The coupler's construction is similar to the AV-547 coupler and operates at altitudes up to 50,000 ft. More Info...
This Antenna Coupler is ruggedly built and housed in an aluminum case
with all circuit elements fully encapsulated. It is specifically
designed to couple multiple receiver systems to a single antenna with a
minimum of insertion loss. The DM H24-1 is a dual glide slope
which will permit operation of two glide slope receivers from one glide slope antenna. More Info...
This Antenna Coupler is ruggedly built and housed in an aluminum case
with all circuit elements fully encapsulated. It is specifically
designed to couple multiple receiver systems to a single antenna with a
minimum of insertion loss. The DM H22-1 is a single VOR and single GS which will permit operation of one NAV and one GS receiver from one VOR antenna. More Info...
Dual communication/single antenna duplexer designed to provide operation between two transceivers and one antenna. In the de-energized mode, the diplexer acts as a 3 dB coupler with the output ports isolated by 20 dB. Control voltage actuated by the microphone circuit switches the antenna to transmitter No. 1 or transmitter No. 2. More Info...
Dual glide slope coupler designed to allow the operation of two glide slope receivers from one glide slope antenna. Compact design makes installation easy. More Info...
Dual marker beacon coupler permits the use of two marker beacon receivers from one marker beacon antenna. Compact design makes installation easy. More Info...
Two input - two output Power Combiner is standard equipment with Comant's CI-120-200 G/S-L as supplied to Cessna. A typical CI-120-200 G/S-L set up is depicted in the inset of this page. The CI-120-5 provides for two separate cable runs to the avionics installation for NAV 1 and NAV 2 receivers. More Info...
Two input - two output Power Combiner is standard equipment with Comant's CI-120-200 G/S and CI-135-200. A typical CI-120-200 G/S set up is depicted in the inset of this page. For either antenna system, the CI-120-4 provides for two separate cable runs to the avionics installation for NAV 1 and NAV 2 receivers. More Info...
Provides operation between a single VOR receiver and a single glide slope receiver from the same VOR/glide slope antenna. Offers polarized VOR and GS output connectors. For military applications. More Info...
The DM H69-1 provides, in one small lightweight component, the ability to operate dual NAVS and dual Glide Slope receivers from one VOR antenna. As with our coupler series, the DM H69-1 is designed to couple multiple systems to the single antenna with minimum insertion loss but with more than adequate isolation to prevent intersystem crosstalk.
The ruggedly built DM H69-1 is housed in an aluminum case and all circuit components are fully encapsulated for vibration protection as well as waterproof protection. More Info...
