This plug driver is identical to our standard mast plug driver P/N 14533, except that this driver is designed for our high strength antenna mast P/N's 14780, 14955-2 and 15016. This plug driver is used to remove 3/8" insulation from antenna wire. More Info...
25ARM300-20D-30 The "D" in the part number designates a series filter which has been added to minimize interference from DME and transponder antenna radiation.
25ARM300-20D-(*) * = Degree angles More Info...
25ARM300-20D-55 The "D" in the part number designates a series filter which has been added to minimize interference from DME and transponder antenna radiation.
25ARM300-20D-(*) * = Degree angles More Info...
25ARM300-20D-90 - The "D" in the part number designates a series filter which has been added to minimize interference from DME and transponder antenna radiation.
25ARM300-20D-(*) * = Degree angles More Info...
This plug driver is used to assemble the chuck assembly into the mast head and for adjusting proper tension on the antennawire using the 1" travel of the chuck assembly in the mast head after the antenna system is installed. It is required for installation of the following antenna masts : P/N's: 14472, 14540, 14690, 14955-1, 15005.
14053 - This is a military specification wire retriever (MS25119-1) designed to release antenna wire P/N 14379 from chuck jaws of the various antenna components and remove 7/16" of insulation in precisely the right length. It prevents nicking of the antenna wire when the insulation is cut for removal. More Info...
