General Info
Multi-User Audio Controllers
Multi-User Audio Controllers
Currently Showing: Single Channel
AUDIO CONTROLLER/CUSTOM AUDIO CONTROLLER/CUSTOM (AA95-729)
Coupled with AA95-728(s) for the flight crew up front, the AA95-729 provides audio control tailored for EMS medical crew. The AA95 series provide control for all aircraft audio: transceivers, receivers, direct input(s), intercom, crew isolation and emergency mode.
  • Full support for Doctor, Nurse and Attendant
  • ICS only for 2 positions plus patient
  • Patient On/Off Switch (Headphones only)
  • ICS CALL switch for use during Pilot (PLT) Isolate (ISO) operation
  • PLT ISO annunciator
  • 2 Comm, 2 FM and AUX XCVR positions
  • ADF, Doppler and music inputs
  • KEYED, LIVE or VOX  ICS with front panel control
  • Illuminated TX selector knob
  • NVIS compliant options available

    Install kit: AA90-IKC

  More Info...
 
AUDIO CONTROLLER/CUSTOM/28V AUDIO CONTROLLER/CUSTOM/28V (AA12S-005)
The small size and extensive radio and intercom functions of the AA12 Series make this an excellent choice for many installations. The new AA12S compact stereo audio controller provides high performance audio to four positions with LIVE/KEYED/VOX ICS modes.  More Info...
 
CUSTOM AUDIO PANEL CUSTOM AUDIO PANEL (AA97-455)
The AA97 is a variation of the AA95 series with the addition of individual RX level controls on each of 6 transceivers.  More Info...
 
CUSTOM SINGLE CHANNEL ACP CUSTOM SINGLE CHANNEL ACP (AA95954TSO)

  More Info...
 
AUDIO CONTROLLER / CUSTOM AUDIO CONTROLLER / CUSTOM (AA95907TSO)
   More Info...
 
AUDIO CONTROLLER/CUSTOM AUDIO CONTROLLER/CUSTOM (N301A-069)
   More Info...
 
AUDIO CONTROLLR/SINGLE CHANNEL AUDIO CONTROLLR/SINGLE CHANNEL (AMS43TSO)
Single channel custom audio controller.
  • Audio Controller providing transmit and intercom (ICS) capabilities for pilot and co-pilot plus intercom for 4 passengers
  • Panel controls include mater RX volume, ICS volume, and ICS squelch (VOX adjust)
  • ICS Tie line provided to allow multiple controllers to be networked
  • COM 1, COM 2, AUX, FM 1, FM 2, PA, NAV 1/2, ADF 1/2, DME/MKR selections
  • Transmit capability for 5 COMs with Auto-receive function
  • Receiver select switches for first 4 COMs
  • High headphone output with up to 500 mW per channel
  • Intercom supports 2 crew plus 5 passengers
  • Intercom features Active Noise Filtering (ANF) system to achieve best possible intercommunications in noisy aircraft environments
  • Voice activated (VOX) squelch
  • Two direct inputs are provided to accomodate functions such as Rad Alt, GPS Alerts, Low Rotor, or Telephone Ringer
  • Front panel selectable emergency mode switches the pilot's headphones directly to selected radio
  • Three internal alert tone generators: single-tone, two-tone, and timed siren (for DH warning)
  • TSOd version available (AMS43TSO)

  More Info...
 
CUSTOM DUAL AUDIO CONTROL CUSTOM DUAL AUDIO CONTROL (N335-002)
   More Info...
 
CUSTOM FACEPLATE FOR N301A-079 CUSTOM FACEPLATE FOR N301A-079 (55-14-008)
   More Info...
 
SINGLE CHANNEL AUDIO CONTROLLER SINGLE CHANNEL AUDIO CONTROLLER (AA95-728)
   More Info...
 
SINGLE CHANNEL AUDIO CONTROLLER SINGLE CHANNEL AUDIO CONTROLLER (AA95849TSO)
ielnc  More Info...
 
SINGLE USER AUDIO PANEL/CUST SINGLE USER AUDIO PANEL/CUST (N301A-075)
With the introduction mid-year 2012 of the new N301A-200/300 series controllers with snap in legends, the need to order N301A-075/079 chassis with accompanying custom faceplates should be replaced with N301A-200/300 series products with customer defined snap in legend kits.

The N301A-075 (standard lighting) and -079 (NVIS) are “faceless” N301A chassis that are delivered without a faceplate.  Custom faceplate labeling configuration must be determined and an accompanying faceplate (P/N 55-11-XXX) order must be placed at time of chassis order. The purpose behind this design was to reduce overall delivery time on custom N301A controllers.  The long-lead time N301A-075/079 chassis could be prebuilt and stocked (normal build time could run 16wks or more at times), and then custom faceplates could be fabricated typically in 5-6wks.

The N301A provides upgraded performance in a plug compatible replacement for the A301-6. Many improvements have been incorporated such as extensive noise suppression and fully floating inputs to remove ground-loop or common mode noise. Both high and low impedance headsets are supported and mic outputs can be individually adjusted for each transceiver.

Features:

  More Info...
 
 
© Copyright 2005-2011 EDMO Asia Pacific